en
Familiarising yourself with your appliance
6
Symbol
Meaning
Childproof lock is activated.
→
WiFi signal strength for Home Connect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through
, there
is no WiFi signal.
If there is an "x" at the symbol
, there
is no connection to the Home Connect
server.
→
Remote start with Home Connect is ac-
tivated.
→
Remote diagnostics with Home Con-
nect for maintenance is activated.
→
The oven light is on or off.
→
Settings area
The settings area is shown in tiles.
The individual tiles show you the current selection op-
tions and settings that have already been implemented.
To select a function, press the corresponding tile.
Information is also shown in tiles.
To scroll to the left or right if there are several tiles, use
the navigation buttons and .
Possible symbols in tiles
Symbol
Meaning
Scroll if there is a lot of content in the
tile.
Decrease or increase the adjustment
value.
Reset the adjustment value.
Close the tile.
Note:
A blue dot or a blue star in a tile indicates that a
new function, a new favourite or an update was down-
loaded to your device using the Home Connect app.
4.3 Buttons
You can use the buttons to directly select various func-
tions.
Button
Function
Switch the appliance on or off.
→
Start or pause the operation.
→
Go back one setting.
Select the timer.
→
Press and hold for approx. 4 seconds:
Activate or deactivate the childproof
lock.
→
4.4 Cooking compartment
Various functions in the cooking compartment provide
support when operating your appliance.
Shelf supports
The shelf supports in the cooking compartment enable
you to place accessories at different heights.
→
Your appliance has 5 shelf positions. The shelf posi-
tions are numbered from bottom to top.
You can remove the shelf supports, e.g. for cleaning.
→
Self-cleaning surfaces
The back panel in the cooking compartment is self-
cleaning. The self-cleaning surfaces are coated with a
porous, matt ceramic layer and have a rough surface.
When the appliance is in operation, the self-cleaning
surfaces absorb splashes from roasting or grilling and
break them down.
If the self-cleaning surfaces no longer clean themselves
adequately during operation, heat up the cooking com-
partment specifically to the right temperature.
→
"Regenerating self-cleaning surfaces in the cooking
Lighting
One or more oven lights illuminate the cooking com-
partment.
When you open the appliance door, the light in the
cooking compartment switches on. If the appliance
door remains open for longer than 15 minutes, the light
switches off again.
For most operating modes, the lighting is switched on
during operation. The lighting switches off again when
the operation ends.
Cooling fan
The cooling fan switches on and off depending on the
appliance's temperature. The hot air escapes above
the door.
ATTENTION!
Covering the ventilation slots will cause the appliance
to overheat.
▶
Do not cover the ventilation slots.
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.
