Before using for the first time
en
11
6
Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial use
You need to make settings for initial use before you
can use your appliance.
Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement:
The function selector must be set to the
"Off" position .
1.
Use the or button to set the time.
2.
Press the button.
a
The time that is set appears on the display.
Tip:
You can go to the "basic settings"
to
specify whether or not the time should be shown on
the display.
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1.
Remove any accessories and leftover packaging,
such as polystyrene pellets, from the cooking com-
partment.
2.
Before heating the appliance, wipe the smooth sur-
faces in the cooking compartment with a soft, damp
cloth.
3.
Keep the room ventilated while the appliance is
heating.
4.
Set the type of heating and temperature.
Type of heat-
ing
3D hot air
Temperature
Maximum
Cooking time
1 hour
5.
Switch off the appliance after the specified cooking
time.
6.
Wait until the cooking compartment has cooled
down.
7.
Clean the smooth surfaces with soapy water and a
dish cloth.
8.
Clean the accessories using soapy water and a dish
cloth or soft brush.
7
Basic operation
7.1 Switching on the appliance
▶
Turn the function selector to any position other than
the "Off" position .
a
The appliance is switched on.
7.2 Switching off the appliance
▶
Turn the function selector to the "Off" position .
a
The appliance is switched off.
7.3 Setting the type of heating and
temperature
1.
Use the function selector to set the type of heating.
2.
Use the temperature selector to set the temperature
or grill setting.
a
The appliance starts heating after a few seconds.
3.
When your food is ready, switch off the appliance.
Tips
¡
The most suitable type of heating for your food can
be found in the description of the type of heating.
"Types of heating and functions", Page 7
¡
You can also set a cooking time and end time on
the appliance.
"Time-setting options", Page 12
Changing the type of heating
You can change the type of heating at any time.
▶
Use the function selector to set the required type of
heating.
Changing the temperature
You can change the temperature at any time.
▶
Use the temperature selector to set the required
temperature.
8
Rapid heating
To save time, you can shorten the preheating time for
set temperatures over 100 °C.
You can use rapid heating for the following types of
heating:
¡
3D hot air
¡
Top/bottom heating
