en
Childproof lock
14
10.3 Preparing food for the programme
Use fresh and, ideally, chilled food.
1.
Weigh the food.
The weight of the food is required in order to cor-
rectly set the programme.
2.
Add the food to the cookware.
3.
Place the cookware onto the wire rack.
Always place the cookware into the cooking com-
partment while it is cold.
10.4 Setting a programme
The appliance selects the optimal type of heating, tem-
perature and cooking time. All you need to do is set
the weight.
Notes
¡
You can set the weight only in the intended area.
¡
After the programme starts, you can no longer
change the programme and the weight.
1.
Use the function selector to set
Programme
.
2.
Use the temperature selector to set
Programme
.
3.
Use the or button to set the required pro-
gramme.
4.
Press the button.
5.
Use the or button to set the weight of your
food. Always set the next higher weight.
‒
The display shows the calculated cooking time.
The cooking time cannot be changed.
‒
For some programmes, the button can be
used to delay the end.
"Setting the end time", Page 12
‒
To change the programme, press the button.
a
After a few seconds, the programme starts and the
cooking time counts down.
a
If the programme has ended, an audible signal
sounds and the display shows the cooking time as
zero.
6.
When the programme ends:
‒
Press any button to end the audible signal pre-
maturely.
‒
To set a cooking time for further cooking, press
the button. The appliance continues to heat
using the programme settings.
‒
When your food is ready, switch off the appli-
ance.
11
Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Notes
¡
You can go to the "basic settings"
specify whether you want the option to set the child-
proof lock.
¡
After a power cut, the childproof lock is deactivated.
11.1 Activating and deactivating the
childproof lock
Requirement:
The function selector must be set to the
"Off" position .
▶
To activate the childproof lock, press and hold the
button until appears in the display.
‒
To deactivate the childproof lock, press and hold
the button until goes out in the display.
12
Basic settings
You can configure the appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Selection
Time display
= hide the time
= display the time
1
Signal duration upon completion of a cook-
ing time or timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
Button tone when pressing a button
= off
= on
1
Cooling fan run-on time
= short
= medium
= long
1
= extra long
1
Factory setting (may vary according to model)
