Siemens Gigaset SX303isdn User Manual Download Page 122

Page: 122 / 183

119

Using Bluetooth devices

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / bluetooth.fm / 14.11.2005

Making calls using the GSM network

You can only make external calls using pre-dialling, i. e. you enter the complete number

on the base station or a registered handset first and then lift the receiver. The following

pre-dialling options are available:

◆

Block dialling (entering telephone number by hand), see page 21

◆

Using a Phonebook entry, see page 36

◆

Using an entry from last number redial list, see page 40

◆

Using an entry from caller list, see page 42

If you have activated

MSN next call

(see page 97), the send MSN "GSM" and a list of

available MSNs are displayed after you press the talk key.

Answering calls from the GSM network

A call from the GSM network is signalled both on your GSM mobile phone and on your

base station or a handset.
You can answer the call on your GSM mobile phone, the base station or a handset.

Using a headset

Preconditions:

◆

The headset is registered (see page 127) and is within range of the base station.

◆

The Bluetooth mode must be set to headset mode.

(Only one voice connection at a time is possible, either on the Bluetooth headset or

on the GSM mobile.)

Answering a call

A call is signalled on a registered headset and is picked up by pressing the talk key on

the Bluetooth headset. For further details on the headset, consult the relevant operating

instructions.

Transferring a call from the base station to the headset

With the Bluetooth headset, you can pick up an existing call on the base station: Press

the talk key on the Bluetooth headset.

Precondition:

You are making a call using the base station.

An existing call can be transferred from your base station to the Bluetooth headset.

When you move outside the range, the base station switches to handsfree mode. In

order to be able to continue the call on the headset, you must bring the headset back

into the base station's Bluetooth range. You then need to press the set key on the

headset or select the

Transf. to h/set

menu option in the base station's online menu.

Open the menu.

Transf. to h/set

Select the menu item and confirm.

If the call cannot be transferred, the display shows

Not possible right now

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands