manualshive.com logo in svg

Siemens Gigaset SX303isdn, User Manual

The Siemens Gigaset SX303isdn is a versatile communication device that offers advanced features and user-friendly functionality. To make the most of this product, it is crucial to have the user manual for guidance. Download the comprehensive manual for free from our website for hassle-free setup and optimal usage.

Share
Download
background image

127

Operating with other devices

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005

Registering a GSM mobile phone on the base station

Carry out the following actions on your GSM mobile phone: 
Prepare your base station for registration, see page 126.
1. Initiate registration on your GSM mobile phone, either as a "paired connection" or a 

"coupled connection". For further details on your GSM mobile phone, consult the 

corresponding operating instructions. 

2. When prompted, enter the system PIN of the base station on the GSM mobile phone. 
When registering, the base station saves either the name transferred by the GSM mobile 

phone (Bluetooth device name, max. 16 characters) or the default name 

GSM phone

. 

For details of how you can change the name, see page 128. You can also change the 

default ringer melody 1, see page 128.
If the Bluetooth connection is active and the Bluetooth device is within the range of the 

base station, a Bluetooth symbol appears in the base station display between the date 

and the time. 
If the GSM mobile phone is within range, a Bluetooth connection is established 

automatically; otherwise the base station regularly initiates "paging" in order to 

establish a connection.

Registering a Bluetooth headset on the base station

A headset is registered on the base station: 

When registering, the base station saves either the name transferred by the Bluetooth 

headset (Bluetooth device name, max. 16 characters) or the default name 

BT headset

. 

For details of how you can change the name, see page 128.

Registering a personal computer (PC)/PDA on the base station

A PC is automatically assigned one of the three internal numbers Int51:, Int52: or Int53:. 
Prepare your base station for registration, see page 126. Carry out the following actions 

on your PC/PDA:
1. Initiate the registration on your PC/PDA using the corresponding Bluetooth software: 

as a "paired connection" or as a "coupled connection", specifying the necessary 

service (e.g. DUN – dial-up networking). For further details on your PC/PDA, consult 

the corresponding operating instructions. 

2. Enter the system PIN of the base station on the PC/PDA.

i

Open the menu.

s

Bluetooth

Select the menu item and confirm. 

s

Reg. BTdevice

Select the menu item and confirm. 

A list of Bluetooth devices is displayed. 

s

BT headset

Select the menu item and confirm. The base station 

searches for the Bluetooth headset. 
Set the Bluetooth headset to registration mode in 

accordance with the manufacturer's instructions.

~ 

Once the Bluetooth headset has been found, enter 

the headset PIN and confirm. 

OK

OK

OK

OK

Summary of Contents for Gigaset SX303isdn
























































































































































































Reviews:

No comments

Related manuals for Gigaset SX303isdn

JPS RTU-292 Installation And Operation Manual preview
RTU-292
Brand: JPS Pages: 116
ZETRON 30 Worldpatch Instruction Manual preview
30 Worldpatch
Brand: ZETRON Pages: 60
Uniden DECT2185 Guide Utilisateur preview
DECT2185
Brand: Uniden Pages: 40
GE Feb-63 User Manual preview
Feb-63
Brand: GE Pages: 18
ESI 45SIP User Manual preview
45SIP
Brand: ESI Pages: 2
Shiro SD3101 User Manual preview
SD3101
Brand: Shiro Pages: 23
Panasonic KX-DT 333 Series Brochure & Specs preview
KX-DT 333 Series
Brand: Panasonic Pages: 4
Panasonic ET-PLF10 Operating Instructions Manual preview
ET-PLF10
Brand: Panasonic Pages: 16
Panasonic Easy-Phone KX-T4000 Service Manual And Technical Manual preview
Easy-Phone KX-T4000
Brand: Panasonic Pages: 21
Panasonic EASA-PHONE KX-T3716NZ Operating Instructions Manual preview
EASA-PHONE KX-T3716NZ
Brand: Panasonic Pages: 24
Panasonic Factory Line 100-60 Instruction Manual preview
Factory Line 100-60
Brand: Panasonic Pages: 32
Panasonic EASA-PHONE KX-T4006NZ Operating Instructions Manual preview
EASA-PHONE KX-T4006NZ
Brand: Panasonic Pages: 38
Panasonic Easa-Phone KX-T3910 Operating Instructions Manual preview
Easa-Phone KX-T3910
Brand: Panasonic Pages: 52
Panasonic KX-A140RUB Service Manual preview
KX-A140RUB
Brand: Panasonic Pages: 81
Panasonic KX-A144 Series Service Manual preview
KX-A144 Series
Brand: Panasonic Pages: 93
Panasonic KX-A145 Series Service Manual preview
KX-A145 Series
Brand: Panasonic Pages: 97
Panasonic KX-A140EXC Service Manual preview
KX-A140EXC
Brand: Panasonic Pages: 99
Panasonic KX-A141ALM Service Manual preview
KX-A141ALM
Brand: Panasonic Pages: 109

Brands by name

Popular brands

Load more brands