Siemens Gigaset SX303isdn User Manual Download Page 101

Page: 101 / 183

System settings

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005

Assigning an MSN a ringer melody

Each receive MSN is assigned a ringer melody when setting up. You can change this

assignment for each receive MSN individually. This means that all terminals will use this

ringer melody to indicate an incoming call to a receive MSN.

Setting up rejecting for the entire MSN group

You can reject an external call not only on your base station, but for all members of an

MSN group. Pressing

REJECT

will give the caller a busy signal instead of a ringing tone.

The entire group will no longer be called. A waiting call can also be rejected during a

call. The call is added to the caller list.

Precondition:

The analogue connection must be set to

No function

(page 129).

By factory default, the function is not activated.

In place of ringer melodies 1-20, you can also assign the "Device ringer"

to an MSN. The handsets assigned to the receive MSN will then use the

ringer melody set on the handset for external calls (page 114).

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Set up MSN

Confirm.

MSN1:

Select MSN and open submenu, e.g.

MSN1: Anna

Ringer melody

Select the menu item and confirm.

u v

Select melody (1 – 10, Device ringer) and confirm,

e.g.

Ringer melody: 5

Hold

down (back to idle status).

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Reject all

Select the menu item and confirm (

‰

= activated).

old

down (back to idle status).

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands