Siemens Gigaset SX303isdn User Manual Download Page 132

Page: 132 / 183

129

Operating with other devices

SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005

De-registering Bluetooth devices

Connecting wire-based analogue devices

The following internal number is provided for operation using analogue devices:

Int.21

The device connected to it must

◆

not be registered on the base station

◆

be set to tone dialling (DTMF) – pulse dialling is not supported

In addition, the corresponding device type must be set and device-specific additional

settings made.
No charges are displayed on the connected devices. However, ongoing charges are

recorded by the base station and can be queried using an added-feature handset or on

a PC.

Device types

The following settings are possible (Setting the device type, page 132).

Open the menu.

Bluetooth

Select the menu item and confirm.

De-reg. BTdevice

Select the menu item and confirm. A list of

registered Bluetooth devices is displayed.

GSM phone

Select the device (e.g.

GSM phone

) and confirm.

The Bluetooth device is then de-registered.

If necessary, on your GSM mobile phone or PC/PDA delete the base

entered during registration.

◆

Telephone

see Page 130, Connecting telephones

◆

Fax

see Page 130, Connecting a fax machine

◆

Modem

see Page 130, Connecting a modem

◆

Answering mach.

see Page 131, Connecting an answering machine

◆

Neutral

see Page 131, Connecting a fax machine

◆

Door type1

see Page 140, Setting up the entrance telephone

◆

Doortype2(DTMF)

see Page 140, Setting up the entrance telephone

◆

Ext. music/hold

see Page 131, Importing a waiting melody from an external

device

◆

No function

see Page 131, No device connected

Note the explanations below relating to the device types and their device-

specific additional settings.

Summary of Contents for Gigaset SX303isdn
























































































































































































Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands

Siemens Gigaset SX303isdn, User Manual

Search results

Summary of Contents for Gigaset SX303isdn

Reviews:

Related manuals for Gigaset SX303isdn

Brands by name

Popular brands