Siemens Gigaset SL78H User Manual Download Page 12

Page: 12 / 78

First steps

Gigaset SL785 / EN-US / A31008-M2009-XXXX-1-XX / starting.fm / 09.01.2009

ion 4,

.09.

2005

If you need to

reopen the battery cover

to connect the USB cable or change

the battery:

Remove the belt clip (if

attached).

Place your fingernail into the

notch at the bottom of the

casing and pull the battery

cover upwards.

change the battery

, place

your fingernail in the cavity in

the casing and pull the battery

upwards.

Attaching/removing the belt clip

The handset has notches on each side to attach the belt clip.

To attach

– Press the belt clip

onto the back of the handset so

that the protrusions on the belt

clip engage the notches.

To remove

– Using your right

thumb, apply pressure to the

center right of the belt clip,

push the fingernail of your left

index finger between the clip

and the casing, and lift the clip

upwards.

Summary of Contents for Gigaset SL78H















































































Search results

Summary of Contents for Gigaset SL78H

Reviews:

Related manuals for Gigaset SL78H

Brands by name

Popular brands

Siemens Gigaset SL78H, User Manual

Search results

Summary of Contents for Gigaset SL78H

Reviews:

Related manuals for Gigaset SL78H

Brands by name

Popular brands