Siemens Gigaset SL78H User Manual Download Page 13

Page: 13 / 78

First steps

Gigaset SL785 / EN-US / A31008-M2009-XXXX-1-XX / starting.fm / 09.01.2009

ion 4,

.09.

2005

Placing the handset in the charging cradle

Insert the power adapter of the charging cradle into the electrical outlet.

Place the handset in the charging cradle, with its

display facing forward

The handset is registered with the base station at the factory. You do not need

to complete a registration. If you wish to use your handset with a different base

station or use further handsets with your base station, you will have to register

the handset manually

page 45.

To charge the battery, leave the handset in the charging cradle.

First battery charge and discharge

The correct charge status can only be displayed if the battery is first fully

charged

and then

discharged.

Please note

Only place the handset into the charging cradle specifically intended for it.

Please note

After the first battery charge

and

discharge, you can place your handset

in the charging cradle after every call.

Always repeat the charging and discharging procedure if you remove the

battery from the handset and reinsert it.

The battery may heat up during charging. This is not dangerous.

After a time, the charge capacity of the battery will decrease for techni-

cal reasons.

Place the handset in the charging cradle for

six

hours.

Once the battery is fully

charged, remove the

handset from the charging

cradle and do not put it

back again until the bat-

tery is fully discharged.

6 h

Summary of Contents for Gigaset SL78H















































































Search results

Summary of Contents for Gigaset SL78H

Reviews:

Related manuals for Gigaset SL78H

Brands by name

Popular brands

Siemens Gigaset SL78H, User Manual

Search results

Summary of Contents for Gigaset SL78H

Reviews:

Related manuals for Gigaset SL78H

Brands by name

Popular brands