Siemens Gigaset SL370 Owner'S Manual Download Page 57

Page: 57 / 76

Handset settings

Gigaset SL375 / AUS / A31008-M1903-C401-1-7619 / registr_sett.fm / 14.8.07

ion 4,

.09.

2005

Registering Bluetooth devices

The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.

Data Transfer

Bluetooth

Search Headset

Search Data Device

The search can take up to 30 seconds.
Once the device has been found, its name

will be shown on the display.

§Options

Press the display key.

Trust Device

Select and press

§OK§

Enter the PIN for the Bluetooth

device you want to

register

and press

§OK§

The device is saved in the list of known

devices.

Cancelling/repeating current search

To cancel search:

Cancel

Press the display key.

Repeat search if necessary:

§Options

Select

and

press

§OK§

Repeat Search

Select and press

§OK§

Editing the list of known (trusted)

devices

Open list

Data Transfer

Bluetooth

Known Devices

A corresponding icon appears next to each

device name in the list displayed:

Viewing entries

Open list

(select entry)

§Options

Press the display key.

View Entry

Select and press

§OK§

Device name and address are

displayed.

Back with

§OK§

De-registering a Bluetooth device

Open list

(select entry)

§Options

Press the display key.

Delete Entry

Select and press

§OK§

Back: press and hold key.

Changing the name of a Bluetooth device

Open list

(select entry)

§Options

Press the display key.

Rename

Select and press

§OK§

Change name

Save

Press the display key

Back: Press and

hold

key.

Please note:

– If Bluetooth is activated and accessories

(e.g. data cables page 66) are plugged into

the connection socket (page 1), Bluetooth

is automatically deactivated.
– If a Bluetooth voice connection has

already been established, Bluetooth is

not deactivated until it is ended.

– If a Bluetooth data connection has

already been established, the response

depends on the receiving device.

– Bluetooth is automatically reactivated

when the accessories are removed.

– If Bluetooth is deactivated and accessories

are plugged in, then Bluetooth cannot be

activated.

Please note:

– If you register a headset, any headset that is

already registered will be overwritten.

– If you would like to use a headset with your

handset that is already registered to

another device (e.g. to a mobile phone),

please

deactivate

this connection before

you start the registration process to

Gigaset.

Icon

Meaning

Bluetooth headset

Bluetooth data device

Please note:

If you de-register an activated Bluetooth

device, it may try to reconnect as an "unregis-

tered device".

Summary of Contents for Gigaset SL370













































































Search results

Summary of Contents for Gigaset SL370

Reviews:

Brands by name

Popular brands

Siemens Gigaset SL370, Owner'S Manual

Search results

Summary of Contents for Gigaset SL370

Reviews:

Brands by name

Popular brands