Siemens Gigaset SL 740 Operating Manual Download Page 53

Page: 53 / 76

Base station settings

SL 740 / Singapore / A31008-L740-S102-1-7619 / settings_bs_hs.fm / 13.07.2004

Changing the system PIN

You can change the base station's default

4-digit system PIN to a 4-digit PIN which is

known only to you.

Base

System PIN

If required, enter the current

system PIN and press

Enter new system PIN. For

security the PIN is shown as

four stars (****).

s ~

Scroll to the next line, repeat

the new system PIN and press

Long

press (idle status).

Assigning authorisations per handset

You can block handsets for external calls.
You can assign the following

authorisations

Call Barring Off

The handset can be

used without restriction.

External Calls

The handset can be used

to make internal calls. External calls can

be accepted.

Internal Only

The handset can only be

used to make internal calls.

Display list of handsets.

s v

Select handset and open

menu.

HS Call Barring

Select and press

Enter system PIN and press

Select authorisation and press

Long

press (idle status).

Emergency numbers

Emergency numbers are preset to local

requirements. You can enter your own

emergency numbers. The emergency

numbers are valid for all handsets.

Emergency numbers can still be dialled

even if your handset is barred for external

dialling.

Entering or changing an emergency

number

Base

Add. Features

Add. Emerg. No

Enter system PIN and press

Enter or change emergency

number.

Press the display key.

Save Entry

Select and press

. The entry

is stored.

Displaying and dialling an emergency

number

Emergency numbers can still be dialled

even if your handset is barred for external

dialling (p. 52) directly or as follows.

Precondition:

The handset is blocked for

external dialling.

Press the talk key.

EmerCall

Press the display key. The

available emergency numbers

are displayed. If

only one

emergency number has been

stored, this will be dialled

immediately.

Select the emergency number

and press

. The connection

is set up.

If an access code has been set up (p. 54),

this will be placed in front of the

emergency number automatically.
You can still dial emergency numbers

despite authorisation blocks (p. 52).
When the keypad lock is active (p. 7), you

cannot call emergency numbers.

Summary of Contents for Gigaset SL 740













































































Search results

Summary of Contents for Gigaset SL 740

Reviews:

Related manuals for Gigaset SL 740

Brands by name

Popular brands

Siemens Gigaset SL 740, Operating Manual

Search results

Summary of Contents for Gigaset SL 740

Reviews:

Related manuals for Gigaset SL 740

Brands by name

Popular brands