Siemens Gigaset SL 740 Page 27 Operating Manual Download

Page: 27 / 76

SMS (text messages)

SL 740 / Singapore / A31008-L740-S102-1-7619 / sms_neutral.fm / 13.07.2004

Deactivating a mailbox:

Set

Call Director

Off

. All the messages

stored for that box are deleted.

Deactivating PIN protection:

Protection: Set

Off

. The mailbox PIN is

reset to "0000".

Changing the name of a mailbox

SMS

Settings

SMS

Mailboxes

Select mailbox.

Edit

Press the display key.

Enter the new name.

Save

Press the display key.

Long

press (idle status).

Changing the PIN and ID of a mailbox

SMS

Settings

SMS

Mailboxes

(Select mailbox)

If required, enter the mailbox

PIN and press

Now set

ID:, Protection:, PIN

as described on

page 25.

Sending a text message to a personal

mailbox

To send a text message to your personal

mailbox, the sender must know your ID

and enter it after your number. Send your

SMS contact a text message via your

personal mailbox. He or she will receive

your SMS number with your current ID

and can then store it in their directory.
If the ID is invalid the SMS cannot be

delivered.

Using data in the attachment

You can save melodies and pictures

(logos) in your handset.

new melody

has the "iMelody"

format. It can either be saved in the File

Manager or installed as a ringer tone

for example.

New pictures

can be saved in the File

Manager or installed as a logo.

You can save and install melodies and

pictures on other handsets that are

registered with the same base station.
For a selection of melodies and logos,

browse these web pages on the Internet:

www.siemens-mobile.com/gigasetsl740.

The Internet pages will tell you which data

is available in your country.

Installing an attachment

Melodies and pictures will be sent to you

by SMS (which may incur a charge).
Open the text message (p. 23) and then

open the attachment (p. 24).

Install

Press the display key.

Turn to the File Manager section: Installing

audio or picture data (page 37).

Saving an attachment

Open the text message (p. 23) and then

open the attachment (p. 24).

Save

Press the display key.

This saves the attachment in the File

Manager:

Melodies in

Sounds

(p. 37)

Pictures in

Images

(p. 37).

Note:

If you briefly press the end call key while the

screensaver logo is activated, the date and

time will be displayed.

Summary of Contents for Gigaset SL 740













































































Search results

Summary of Contents for Gigaset SL 740

Reviews:

Related manuals for Gigaset SL 740

Brands by name

Popular brands

Siemens Gigaset SL 740, Operating Manual

Search results

Summary of Contents for Gigaset SL 740

Reviews:

Related manuals for Gigaset SL 740

Brands by name

Popular brands