Siemens GIGASET S88H Manual Download Page 23

Page: 23 / 31

Appendix

Gigaset S88H / EN for China / A31008-M1951-Y101-2-5D19 / appendix.fm / 27.7.09

ion 4,

.09.

2005

Appendix

Care

Wipe the base station, charging cradle and

the handset with a

damp

cloth (do not use

solvent) or an antistatic cloth.

Never

use a dry cloth. This can cause a

build up of static.

Contact with liquid

If the handset has come into contact with

liquid:
1.

Switch the handset off and remove

the batteries immediately

2. Allow the liquid to drain from the hand-

set.

3. Pat all parts dry, then place the handset

with the battery compartment open

and the keypad facing down in a dry,

warm place

for at least 72 hours

(

not

in a microwave, oven etc.).

4. Do not switch on the handset again

until it is completely dry.

When it has fully dried out, you will nor-

mally be able to use it again.

Questions and answers

If you have any questions about using

your phone, visit us at

www.gigaset.com/cn

at any time. The table below contains a list

of common problems and possible solu-

tions.

The display is blank.

1. The handset is not turned on.

Press

and hold

the end call key

2. The battery is flat.

Charge or replace the batteries

(page 5).

The keys of a handset do not respond when

pressed.

The keypad lock is activated.

Press and

hold

the hash key

(page 8).

"Base station x"

flashes

on the display.

1. The handset is outside the range of the

base station.

Move the handset closer to the base sta-

tion.

2. The handset has been deregistered.

3. The base station is not turned on.

Check the base station's mains adapter.

Base Search flashes in the display.

No base station turned on or in range.

Move the handset closer to the base sta-

tion.

Check the base station's mains adapter.

Handset does not ring.

The ringer tone is switched off.

Activate the ringer tone (page 20).

The other party cannot hear you.

You have pressed the

(INT) key. The hand-

set is "muted".

Activate the microphone again (page 12).

The number of the caller is not displayed

despite CLIP.

Calling Line Identification is not enabled.

The caller

should ask the network provider

to release Calling Line Identification (CLI).

You hear an error tone when keying an

input

(a descending tone sequence).

Action has failed/invalid input.

Repeat the operation.
Watch the display and refer to the user

guide if necessary.

You cannot listen to messages on the net-

work mailbox.

Your phone system is set for dial pulsing.

Set your phone system to touch tone dial-

ling.

Summary of Contents for GIGASET S88H
































Search results

Summary of Contents for GIGASET S88H

Reviews:

Related manuals for GIGASET S88H

Brands by name

Popular brands

Siemens GIGASET S88H, Manual

Search results

Summary of Contents for GIGASET S88H

Reviews:

Related manuals for GIGASET S88H

Brands by name

Popular brands