Siemens Gigaset S790 User Manual Download Page 43

Page: 43 / 97

SMS (text messages)

Gigaset S790-S795 / en Großbritannien / A31008-M2102-L101-2-7619 / sms_BRD_neutral.fm / 29.03.2010

rsion 4.1, 21

.11.2007

Opening the incoming message list
with the

key

Press.

The incoming message list is indicated by
the mailbox name and the number of entries
(example):

Bold:

new entries

Normal font:

old entries

If necessary select a mailbox and open list by
selecting

§OK§

(enter mailbox PIN if required

and confirm by pressing

§OK§

The number and date of receipt are dis-
played in the entry list.

Opening the incoming message list via
the SMS menu

(If necessary, select mailbox,

enter mailbox PIN)

Incoming

Deleting the incoming message list

All

new and old

SMS messages in the list are

deleted.

Open the incoming message list.

§Options§

Open menu.

Delete All

Select,

press

§OK§

and confirm

with

§Yes§

. The list is deleted.

Reading or deleting SMS messages

Open the incoming message list, then:

Select SMS.

§Read§

Press the display key. The text is
displayed. Scroll line by line
using

or delete the SMS with

§Options§

Delete Entry

§OK§

After you have read a new SMS, it is given the
status "Old" (is no longer shown in bold).

Changing the character set

Read the SMS

§Options§

Press the display key.

Character Set

Text is shown in the selected character
set.

Replying to or forwarding SMS
messages

Read the SMS

§Options§

Press the display key.

You have the following options:

Reply

Write and send a new SMS in reply to the
sender (

page 40).

Edit

Edit the text in the SMS and return it to
the sender (

page 40).

Forward

Forward the SMS to another number
(

page 40).

Copying the number to the
directory

Copying the sender's number

Open the incoming message list and
select the SMS (

page 41).

§Options§

Copy to Directory

Complete the entry

page 34.

SMS:

(2)

0123727859362922

14.10.09 09:07

Please note

An attached mailbox identifier is added
to the directory.

Summary of Contents for Gigaset S790


































































































Search results

Summary of Contents for Gigaset S790

Reviews:

Related manuals for Gigaset S790

Brands by name

Popular brands

Siemens Gigaset S790, User Manual

Search results

Summary of Contents for Gigaset S790

Reviews:

Related manuals for Gigaset S790

Brands by name

Popular brands