Siemens Gigaset S675IP User Manual Download

Page: 98 / 164

Web configurator

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / web_server.fm / 6.8.07

Status

The status of the connection will be

shown for VoIP connections:

registered

The connection is activated. The phone

has been successfully registered. You

can use the connection to make calls.

Disabled

The connection is deactivated. The

phone is not registering with the corre-

sponding account with the VoIP serv-

ice. You cannot use the connection to

make or receive calls.

Registration failed

Server not accessible

Your phone was unable to register with

the VoIP service, e.g. because the VoIP

access data is incorrect or incomplete

or the phone is not connected to the

Internet. There is information about

this in the section "Questions and

answers" from page 118 onwards.

Active

You can use the option in the

Active

col-

umn to activate ( ) and deactivate

( ) VoIP connections. If a connection

is deactivated, the phone will not regis-

ter for this connection. The connection

can be activated/deactivated by clicking

directly on the option. The change does

not need to be saved.

To configure a connection or to change

the configuration of a connection:

Click

Edit

next to the connection.

This will open a Web page where you can

make the settings needed. More in forma-

tion is available

in the section "Configuring the VoIP

connection" on page 97 and

in the section "Configuring the fixed

line connection" on page 101

Configuring the VoIP connection

Open the Web page:

Open the following Web page:

Settings

Telephony

Connections

Click

Edit

next to the VoIP connection

that you want to configure or the con-

figuration of which you want to

change.

This will open a Web page where you can

make the settings that your phone needs

to access your provider's VoIP server.
The Web page always displays the

following areas:

IP Connection

(page 97),

Personal Provider Data

(page 98).

The areas

General Provider Data

(page 98) and

Network

(page 99)

can be shown and hidden by clicking the

Show Advanced Settings

and

Hide Advanced

Settings

buttons.

You must enter the VoIP provider's general

access data in these areas. You can down-

load the general access data for many VoIP

providers from the Internet (page 101).

Make the settings on the Web page.

Save them in the phone, see page 100.

Activate the connection if necessary,

see page 100.

Area:

IP Connection

Connection Name or Number

Enter a name for the VoIP connection or

the VoIP phone number (max. 16 char-

acters). This name is used to display the

connection on the handset and the

Web configurator interface, e.g. during

allocation of send and receive numbers

(page 105), for the call display

(page 27).

Summary of Contents for Gigaset S675IP





































































































































































Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands

Siemens Gigaset S675IP, User Manual

Search results

Summary of Contents for Gigaset S675IP

Reviews:

Related manuals for Gigaset S675IP

Brands by name

Popular brands