Siemens Gigaset S675 IP Manual Download Page 95

Page: 95 / 254

Info Center – with the handset always online

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / Info_Center.fm / 14.05.2009

ion 8,

.09

.200

Messages when loading requested information

The information is loaded from the Internet. Wait a few seconds until the infor-

mation is displayed. The display shows

Please wait

If the information for an info service cannot be displayed, one of the following

messages appears:

Requested page cannot be reached.

Possible causes of this are:

Time limit exceeded (timeout) when loading the information, or

The Internet server for the info services cannot be accessed.

Check your Internet connection and repeat the request at a later time.

Coding error on requested page.

The content of the requested info service is coded in a format which the hand-

set cannot display.

Unable to show requested page.

General error when loading the info service.

Authorization failed.

Registration has failed. Possible causes of this are:

You have not entered your registration data correctly.

Reselect the info service and repeat the registration process. Please

remember that data is case sensitive.

You are not entitled to access this info service.

Registering for personalized info services

If a special registration with user name and password is required to access an

info service, the following is displayed after the service has been called up:

Username

Enter the user name supplied by the provider of the info service.

Password

Enter the password associated with this user name.

§Save§

Press the Display key to send the registration data.

If registration was successful, the requested info service is displayed.

Authorization

Username:

Password:

Save

Summary of Contents for Gigaset S675 IP































































































































































































































































Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands

Siemens Gigaset S675 IP, Manual

Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands