Siemens Gigaset S675 IP Manual Download Page 177

Page: 177 / 254

175

Setting the phone with the PC

S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 14.05.2009

ion 8,

.09

.200

Deleting dialing plans

Select

Delete

next to the dialing plan you wish to delete.

The dialing plan is deleted from the list immediately. The space in the list is

released.

Emergency numbers

Dialing plans for emergency numbers (e.g. the

local

emergency service

number) are preset for certain countries. The fixed line network is determined

as the

Connection Type

These dialing plans cannot be deleted, deactivated or blocked. However, you

can change the

Connection Type.

This should only be changed if the phone is not connected to the fixed line net-

work. If you choose a VoIP connection, please make sure the VoIP provider sup-

ports calls to emergency numbers. If the VoIP connection is deleted from the

configuration, the emergency call can no longer be made.
If no emergency numbers are set by default, define dialing plans for emergency

numbers yourself and assign them to a connection that you know supports

emergency calls. Deactivate the

Use Area Codes

option for these dialing plans.

Calls to emergency numbers are always supported by fixed line networks.

Activating/deactivating network mailbox, entering numbers

Many fixed network providers and VoIP providers offer answering machines on

the network – these are known as network mailboxes.
Each network mailbox accepts incoming calls made via the corresponding line

(fixed line network or corresponding VoIP phone number).
You can enter the relevant network mailbox for each configured connection

(VoIP, fixed line network) via the Web configurator. You can activate or deacti-

vate the network mailbox for your VoIP connections.

Open the following Web page:

Settings

Telephony

Network Mailbox

A list with all possible connections is displayed on the Web page. The names of

the connections are displayed in the

Connection

column.

Please note

Predefined dialing plans set as defaults (for emergency numbers)

cannot

deactivated and

cannot

be deleted.

Warning

Emergency numbers cannot be dialed if the keypad lock is activated. Before

dialing, press

and hold

the Pound key

, to release the keypad lock.

If you have activated an automatic area code (

Page 172

) and if no dial-

ing plan for emergency numbers is defined, the area code will also be pre-

fixed to emergency calls made via VoIP.

Summary of Contents for Gigaset S675 IP































































































































































































































































Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands

Siemens Gigaset S675 IP, Manual

Search results

Summary of Contents for Gigaset S675 IP

Reviews:

Related manuals for Gigaset S675 IP

Brands by name

Popular brands