166
Setting the phone with the PC
S675IP / USA-CAN eng / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 14.05.2009
Ve
rs
ion 8,
03
.09
.200
8
Voice Quality
Default settings for the codecs used are stored in your phone: one setting opti-
mized for narrow and one for wide bandwidths.
¤
Activate one of the options
Optimized for low bandwidth
/
Optimized for high
bandwidth
if you wish to accept a default setting for all VoIP connections. The
settings are shown in the
Settings for Connections
area and cannot be
changed.
¤
Activate the
Own Codec preference
option if you wish to select and set connec-
tion-specific voice codecs yourself (see "
Area: Settings for Connections
").
Area:
Settings for Connections
In this area you can make specific settings for each of your VoIP phone num-
bers.
You can make the following settings for each VoIP phone number configured
on your phone:
Volume for VoIP Calls
Depending on the VoIP provider, it is possible that the received handset/ear-
piece volume is too low or too high, so that adjusting the volume via the hand-
set is not adequate.
Specify whether the received volume range is too high or too low. The follow-
ing options are available:
Low
Handset/earpiece volume is too high. Activate this option to reduce the vol-
ume by 6 dB.
Normal
The handset/earpiece volume does not need to be raised/lowered.
High
Handset/earpiece volume is too low. Activate this option to increase the vol-
ume by 6 dB.
Please note
If only one VoIP connection is permitted, the following VoIP network services
will
no
longer be available:
u
Call waiting is not displayed during a call via VoIP.
u
External consultation call from a VoIP call
u
Call swap and initiating a conference call via VoIP
