Siemens Gigaset S450 IP User Manual Download Page 61

Page: 61 / 143

Setting the handset

Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / settings_bs_hs_pabx.fm / 28.3.07

ion 4,

.09.

2005

Setting the display backlight

Depending on whether or not the handset

is in the base station you can set different

levels of display backlight. If the base sta-

tion is switched on, the display is perma-

nently dimmed.

Settings

Display

Backlight

The current setting is displayed.

Change multiple line input:

In Charger

Select

Off

without Charger

Select

Off

§Save§

Press the display key.

Press and

hold

(idle status).

Assigning the handset's
display keys

The default settings for the handset's dis-

play keys are preset with functions in idle

status. You can change the assignment of

the display keys, i.e. assign other func-

tions to the display keys. The change is

handset-specific.

Assigning a function

In idle status

press and hold

the right

or left display key (e.g.

§FixedLine§

The list of possible key assignments is

opened. The following can be selected:

INT

(

§INT§

)

Opens the list of internal subscribers.

SMS

(

§SMS§

)

Opens the SMS submenu for writing,

sending and reading SMS messages

(page 40):

Messaging

SMS

SMS Service

(

§SMS Info§

)

Opens the menu for ordering an info

service (page 46):

Messaging

SMS

SMS Service

SMS Notific.

(

§Notif.§

)

Opens the menu for activating SMS

notification (page 44):

Messaging

SMS

Settings

Notify Type

E-mail

(

§EMail§

)

Opens the e-mail submenu for receiv-

ing and reading e-mail notifications

(page 49):

Messaging

E-mail

Messenger

(

§Messgr.§

)

Opens the Messenger submenu for

chatting with friends on the Internet

(page 52):

Messaging

Messenger

Fixed Line Call

(

§FixedLine§

)

Opens the pre-dialling option for mak-

ing a call via the fixed network (fixed

line).

IP Call

(

§IP§

)

Opens the pre-dialling option for mak-

ing a call via VoIP.

Select a function and press

§OK§

The handset returns to idle status.

The label of the display key has changed

(e.g.

§Messgr.§

when choosing:

Messenger

Starting a function

With the handset in idle status, press

the display key

briefly

The function menu (page 60) is opened.

Please note:

When the display backlight is switched on, the

standby time of the handset is reduced to

approx. 30 hours.

Summary of Contents for Gigaset S450 IP
















































































































































Search results

Summary of Contents for Gigaset S450 IP

Reviews:

Related manuals for Gigaset S450 IP

Brands by name

Popular brands

Siemens Gigaset S450 IP, User Manual

Search results

Summary of Contents for Gigaset S450 IP

Reviews:

Related manuals for Gigaset S450 IP

Brands by name

Popular brands