Siemens Gigaset S450 IP User Manual Download Page 58

Page: 58 / 143

Messenger

Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / messenger.fm / 28.3.07

ion 4,

.09.

2005

Message types

In instant messaging, a distinction is made

between the following types of message:

Buddy messages

are the 'instant mes-

sages' you receive from your buddies.

You can answer the messages.

Info messages

are special information

from the provider. They are forwarded

to you, but you cannot reply to them.

Example:

With some messaging pro-

viders you receive an info message

when another subscriber tries to add

you to their buddy list. You are

prompted to check the messages on

the messenger client on your PC.
Via the messenger client on your PC

you can agree to the action or refuse

permission. Without your agreement,

the other subscriber cannot add you to

their buddy list.

Reading messages

Precondition:

You have opened the mes-

sage list and selected a message with

Press the display key

§Read§

The message is opened for you to read.
You have the following options:

§Delete§

Delete a message from the list

You will return to the message

list.

Or:

§Answer§

(for buddy messages only)

Reply to message. The text

editor is opened. You can write

a reply (see "Writing and send-

ing messages" on page 57).

Or:

Back to the message list.

Deleting a message

Precondition:

You have opened the mes-

sage list and selected a message with

Press the display key

§Delete§

Writing and sending messages

Precondition

You are reading a buddy's message and

press the display key

§Answer§

You have pressed the display key

§Chat§

in the buddy list or the buddy profiles.

A text editor is opened.

Use the handset keys to enter a mes-

sage (max. 612 characters, EATONI pre-

dictive text is available, page 112).

Select

§Menu§

Send

and press

§OK§

The message is sent to the buddy.

If the messenger server is unable to send

the message to the buddy, a message will

be displayed.

Confirm the message by clicking on

§OK§

The text-editor will re-open with your

message. You can then retry sending the

message.

Interruption while writing

If you receive a call while you are writing a

message or the connection to the messen-

ger server is interrupted, the text editor is

terminated. Your message is stored tem-

porarily until ...

... you start up a chat with the same

buddy (page 56). The text editor is

opened with the stored text. You can

finish writing the message and send it.

... you wish to write a message to

another buddy. The stored text is

deleted. The text editor is empty.

... you go offline. The text is deleted.

Menu options for the text editor

By pressing

§Menu§

within the text editor

you have the following options:

Send

Send message to buddy.

Delete Text

Delete the whole text.

Summary of Contents for Gigaset S450 IP
















































































































































Search results

Summary of Contents for Gigaset S450 IP

Reviews:

Related manuals for Gigaset S450 IP

Brands by name

Popular brands

Siemens Gigaset S450 IP, User Manual

Search results

Summary of Contents for Gigaset S450 IP

Reviews:

Related manuals for Gigaset S450 IP

Brands by name

Popular brands