Siemens Gigaset S450 IP User Manual Download Page 23

Page: 23 / 143

Making calls with VoIP and the fixed network

Gigaset S450 IP LBA / IM-Nord_en / A31008-M1713-R221-2-7619 / telephony.fm / 28.3.07

ion 4,

.09.

2005

Cancelling the dialling operation

You can cancel the dialling operation with

the end call key

Ending a call

Press the end call key.

Answering a call

The handset indicates an incoming call in

three ways: by ringing, by a display on the

screen and by the flashing handsfree key

You can accept the call by:

Pressing the talk key

Pressing the display key

§Accept§

Pressing the handsfree key

If the handset is in the charging cradle and

the

Auto Answer

function is activated

(page 61), the handset will take a call

automatically when you lift it out of the

cradle.
If the ringer tone is intrusive, press the

§Silence§

display key. You can accept the call

so long as it is displayed on the screen.

Calling Line Identification

When you receive a call from the Internet,

the caller's number and/or the name they

have specified is displayed on the screen.
When you receive a call from the fixed net-

work, the caller's number is displayed on

the screen if the following conditions are

met:

Your fixed network provider supports

CLIP, CLI:
– CLI (Calling Line Identification):

number of the caller is transmitted

– CLIP (Calling Line Identification

Presentation): the caller's number is

displayed.

You have arranged CLIP with your net-

work provider.

The caller has arranged CLI with the

network provider.

If the phone number is identified and the

caller's number is saved in your directory,

the name will be displayed from the direc-

tory.

Call display

You can use the display to decide whether

the call is for your fixed network number

or your VoIP number.

Calls to your fixed network number

1 Ringer tone icon

2 Number or name of caller

3 Display of the receiving number: the name is

displayed that you have assigned to your

fixed network number (page 89).

Please note:

Only calls to receiving numbers that are

assigned to your handset will be signalled

(page 93).
If a phone number is not assigned to any

handset as a receiving number, the calls will

be signalled on all handsets.

1234567890

for Fixed network

Accept

Silence

Summary of Contents for Gigaset S450 IP
















































































































































Search results

Summary of Contents for Gigaset S450 IP

Reviews:

Related manuals for Gigaset S450 IP

Brands by name

Popular brands

Siemens Gigaset S450 IP, User Manual

Search results

Summary of Contents for Gigaset S450 IP

Reviews:

Related manuals for Gigaset S450 IP

Brands by name

Popular brands