background image

26

Operating the answering machine

Gigaset S185 / Canada EN / A31008-M1729-R401-1-5819 / answering_m.fm / 22.6.09

An external call is signaled on the handset: 

Ÿ

Press the display key. 

The answering machine starts immedi-

ately in recording mode and records the 

call. The set time for the call acceptance 

(page 26) is ignored.

Activating/deactivating two-way 

recording

You can record an 

external

 call with the 

answering machine. 

¤

Inform the caller that the call is being 

recorded.

§Options§

 Open 

menu.

Two Way Record 

Select and press 

§OK§

The two-way recording is indicated on the 

display by an advisory text and is added to 

the answering machine list as a new mes-

sage. 

§End§

Press the display key to stop 

the two-way recording.

The max. recording time depends on the 

available memory of the answering 

machine. If the memory is full you will 

hear an end tone, the recording is 

aborted, and the call recorded up to that 

point is listed in the answering machine 

list as a new message. 

Activating/deactivating listen in

During recording of a message you can lis-

ten in via the loudspeaker of registered 

handsets and the base station.

Activating/deactivating listen in

v

 

¢

Ð

 

¢

Voice Mail 

¢

Call Screening 

¢

Handset 

and/or

 Base

(

= on)

Press and 

hold

 (idle status). 

You can switch off the 

Call Screening

 func-

tion on the handset during the recording.

Switching off listen in for the current 

recording

a

 Press the end call key.

Setting up the answering 
machine

The answering machine has already been 

preset at the factory. Set up individual set-

tings using the handset.

Toll-Saver Mode - Call acceptance/

charge saving function for remote 

operation

You can set when you want the answering 

machine to accept a call.
The options are: 

0 sec.

, after 

10 sec.

20 sec.

 

or 

30 sec.

 and the cost-saving setting 

Auto

On 

Auto

 the following applies for call 

acceptance: 

u

If no new messages are present, the 

answering machine accepts a call after 

20 seconds

.

u

If new messages are present, the 

answering machine accepts a call after 

10 seconds

When operating remotely you then know 

after approx. 15 seconds that there are no 

new messages (otherwise the answering 

machine would already have accepted 

your call). There will be no call charges if 

you hang up now.

v

 

¢

Ð

 

¢

Voice Mail 

¢

Ring Delay 

Select 

r

 

Auto

10 sec.

20 sec.

30 sec.

sec.

.

§Save§

 

Press the display key.

Press and 

hold

 (idle status). 

Setting the recording time

You can set the maximum recording time 

for a message. The options are: 

30

60

,

 

120 seconds

 or 

Maximum

.

Summary of Contents for Gigaset S185
























































Reviews: