17
Using several handsets
Gigaset S1 colour / englisch / A31008-M1573-R111-1-6Z19 / start_guide_time.fm / 13.04.2004
.
Activating the room monitor function and entering the 'call to' number for
the first time
Step 1: Open the input field:
v
;
s
é
;
Room Monitor
.
Step 2: Activate room monitor:
r
(in the
Room M.:
line, select
On
);
Step 3: Enter the destination number:
s
(to the next line);
Edit
;
Enter
internal
number:
INT
s
(select handset)
;
or:
Enter
external
number:
~
;
(open menu);
Save Entry
;
Step 4: Set the sensitivity:
if necessary press
s
(to the next line);
r
;
Save
;
The room monitor function is now activated.
Once the room monitor is activated, switch directly to the room monitor setting with
v
(open menu).
Deactivating the room monitor
You can deactivate the room monitor
remotely
(depending on the base). Take the call
from the room monitor and press
O
R
. The room monitor function will deactivate
around 90 seconds after the call ends. The room monitor will make no further calls. The
other room monitor functions on the handset (e.g. no ringer) will remain activated until
you press the display key
Off
on the handset that is in the baby's room.
Setting the Walk and Talk mode
The Walk and Talk function allows two handsets (maximum range 300 metres) to call
each other no matter how far they are from the base.
Precondition:
◆
Both handsets have been registered to the same base (recommended for the room
monitor function)
or
◆
Both handsets are registered to different bases and both are set to
Best Base
or
◆
One of the handsets is not registered to any base and the registered handset is set
to
Best Base
or
◆
Neither handset is registered to a base.
W
Always check the settings of the room monitor before you leave
home, e.g. sensitivity and phone line.
i
The room monitor function severely curtails the handset's operating
time. If necessary you should place the handset which is near the baby in
the charger to ensure that the battery does not run down.
The room monitor function can also be used in Walk and Talk mode.
i
To reactivate the room monitor function with the same telephone
number, you must turn on the activation again and save with
Save
.
OK
OK
OK
à
OK
