22
SMS (text messages)
Gigaset E365 / AUS / A31008-M1806-C401-1-7619 / sms_neutral.fm / 10.11.2008
Ve
rs
ion 4,
16
.09.
2005
SMS (text messages)
Your unit is supplied ready for you to send
text messages immediately.
Requirements:
u
Calling line identification presentation
(CLIP, page 14) is enabled for your
phone connection.
u
Your network provider supports SMS in
the fixed network (information on this
can be obtained from your network
provider).
u
You are registered with your service
provider to send and receive SMS.
Text messages are exchanged between
SMS centres that are operated by service
providers. You must enter the SMS centre
through which you wish to send and
receive in your unit. You can receive SMS
from
every
SMS centre that is entered if
you have registered with your service pro-
vider. The registration wizard (page 22)
will help you to register.
Your text message is sent through the SMS
centre that is active (page 24). Only one
SMS centre can be active at any one time.
If no SMS centre is entered, the SMS menu
only consists of the entry
Settings
. Enter an
SMS centre (page 23).
Please remember:
u
If your phone is connected to a PABX,
please read page 25.
u
You must also have registered with
your service provider for receiving SMS
text messages.
u
Each incoming SMS is signalled by a
single ring (ringtone as for external
calls). If you accept such a call, the SMS
will be lost. To prevent this, suppress
the first ringtone for all external calls
Registering with the registration
wizard
You can use the registration wizard to reg-
ister with all service providers whose
number you have entered to send and
receive SMS messages.
Requirement:
u
You must have stored a number for at
least one SMS centre.
When you call up the SMS menu for the
first time, the wizard automatically regis-
ters you with accessible SMS centres
whose number you have entered. You can
also use the registration wizard to register
with SMS centres at a later time.
On first call:
Menu§
¢
SMS
¢
§OK§
¢
Register to allServices?
¢
§Yes§
Later:
§Menu§
¢
SMS
¢
§OK§
¢
Settings
¢
§OK§
¢
Subscribe SMS
¢
§OK§
¢
Register to allServices?
¢
§Yes§
You can now receive text messages from
any of the SMS centres whose number you
have entered (page 23).
Writing/sending an SMS
An SMS may contain up to 160 characters.
Writing/sending an SMS
§Menu§
¢
SMS
¢
§OK§
¢
Write Message
¢
§OK§
~
Write an SMS. For how to enter
the text, see page 39.
§Menu§
¢
Send Text
Select and press
§OK§
.
s
/
~
Enter the number with prefix
(including your local area
code) from the directory or key
it in manually, and press
§OK§
.
For SMS to an SMS mailbox:
put the mailbox ID at the
end
of the number.
The SMS is sent.
