Siemens Gigaset CE460 IP R User Manual Download

Page: 143 / 159

140

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / glossary.fm / 02.03.2007

ion 2,

.12.

2006

IP (Internet Protocol)

TCP/IP protocol on the

Internet

. IP is responsible for addressing parties in a

Network

using

IP addresses

and routes data from the sender to the recipient. IP determines the

paths (routing) along which the data packets travel.

IP address

A unique address for a network component within a network on the basis of the TCP/IP

protocols (e.g. LAN, Internet). On the

Internet

, domain names are usually assigned

instead of IP addresses.

DNS

assigns the corresponding IP address to the domain name.

The IP address has four parts (decimal numbers between 0 and 255) separated by full

stops (e.g. 230.94.233.2).
The IP address is made up of the network number and the number of the

Network sub-

scribers

(e.g. phone). Depending on the

Subnet mask

, the front one, two or three

parts make up the network number and the rest of the IP address addresses the network

component. The network number of all the components in any one network must be

identical.
IP addresses can be assigned automatically with DHCP (dynamic IP addresses) or manu-

ally (static IP addresses).
See also:

DHCP

IP pool range

Range of IP addresses that the DHCP server can use to assign dynamic IP addresses.

ISP

Internet Service Provider

See

Internet Service Provider

LAN

Local Area Network

Network with a restricted physical range. A LAN can be wireless (WLAN) and/or wired.

Local IP Address

The local or private IP address is the address for a network component in the local net-

work (LAN). The network operator can assign any address he or she wants. Devices that

act as a link from a local network to the Internet (gateway or router) have a public and

a private IP address.
See also

IP address

Local SIP Port

See

SIP port/Local SIP port

MAC address

Media Access Control Address

Hardware address by means of which each network device (e.g. network card, switch,

phone) can be uniquely identified worldwide. This consists of 6 parts (hexadecimal

numbers), which are separated by "-"(e.g. 00-90-65-44-00-3A).
The MAC address is assigned by the manufacturer and cannot be changed.

Mbps

Million bits per second

Unit of the transmission speed in a network.

Summary of Contents for Gigaset CE460 IP R
































































































































































Search results

Summary of Contents for Gigaset CE460 IP R

Reviews:

Related manuals for Gigaset CE460 IP R

Brands by name

Popular brands

Siemens Gigaset CE460 IP R, User Manual

Search results

Summary of Contents for Gigaset CE460 IP R

Reviews:

Related manuals for Gigaset CE460 IP R

Brands by name

Popular brands