38
Setting the handset
Gigaset C610H / IM1 EN / A31008-M2355-R101-1-4N19 / registr_sett.fm / 24.03.2011
V
e
rsion 4, 16.0
9
.2005
¤
Press
§Save§
to save the settings.
When the room monitor function is acti-
vated, the idle display looks as shown below:
Changing the set destination
number
v
¢
É
¢
Room Monitor
¤
Enter and save number as described
under "Activating the room monitor and
entering the destination number"
(
¢
page 37).
Cancel/deactivate room monitor
Press the end call key
a
to cancel the call
when the
room monitor is activated
.
In idle status
press the display key
§OFF§
to deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites
: The phone must support tone
dialling and the room monitor should be set
for an external destination number.
¤
Accept the call from the room monitor
and press keys
9
;
.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room monitor
settings (e.g., no ringtone) on the handset
will remain activated until you press the dis-
play key
§OFF§
on the handset.
To reactivate the room monitor function
with the same phone number:
¤
Reactivate and save with
§Save§
(
¢
page 37).
Setting the handset
Your handset is preconfigured, but you can
change the settings to suit your individual
requirements.
Quickly accessing numbers
and functions
You can assign a
number from the directory
to each of the
digit keys
Q
and
2
to
O
.
The left and right
display keys
have a
func-
tion
pre-selected by default. You can change
the assignment (
¢
page 39).
The number is then dialled or the function
started by simply pressing a key.
Assigning digit keys (quick dial)
Prerequisite:
You have not yet assigned a
number to the digit key.
¤
Press and
hold
the digit key.
or
Press the digit key
briefly
and press the
§QuickDial§
display key.
The directory opens.
¤
Select an entry and press
§OK§
.
The entry is saved to the appropriate digit
key.
i
V
07:15
INT 1
22 Oct
Á
Room Monitor
0891234567
OFF
Options
Please note
If you delete or edit the entry in the direc-
tory at a later date, this will not affect the
assignment to the number key.
