Siemens Gigaset C450 IP Owner'S Manual Download

Page: 31 / 106

Using the directory and lists

Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / directories_charges.fm / 24.9.07

Ver

on 4, 16.

09.20

Managing directory entries

You have selected an entry (page 29).

Editing entries

§Menu§

Edit Entry

Edit the number if required,

and press

§OK§

Edit the name if required, and

press

§OK§

Assigning a key

You can assign keys

and

with a

number. The number is then dialled by

simply pressing a key.

§Menu§

Shortcut

Assign to the current entry for quick

dial to a selected key.

Using other functions

(select entry; page 29)

§Menu§

The following functions can be selected

with

Use Number

Edit or add to a saved number. Then

dial or use other functions with

§Menu§

Delete Entry

Delete selected entry.

Send Entry

Send a single entry to another handset

(page 30).

Delete List

Delete

all

directory entries.

Send List

Send the complete list to another hand-

set (page 30).

Using quick dial keys

Press and

hold

the required quick dial

key (page 30).

If an asterisk (*) is placed at the end of the

relevant phone number, the number is

dialled via the non-default connection;

otherwise it is always dialled via the

default connection set (page 46).

Sending the directory to another

handset

Preconditions:

The sending and receiving handsets

must both be registered to the same

base station.

The other handset can send and receive

directory entries.

(Select entry; page 29)

§Menu§

Send Entry

Send List

Enter the internal number of

the receiving handset and

press

§OK§

A successful transfer is confirmed by a

message and confirmation tone on the

receiving handset.
If you have sent a single entry, you can

transfer another entry with

§OK§

Please note:

Entries with identical numbers are not

overwritten in the receiver handset.

The transfer is cancelled if the phone

rings or if the memory of the receiving

handset is full.

Copying a displayed number to the

directory

You can copy numbers that are displayed

in a list, e.g. the calls list or last number

redial list, to the directory.
A number is displayed.

§Menu§

Copy to Directory

Complete the entry (page 29).

Copying a number from the directory

You can open the directory in many oper-

ating situations e.g. to copy a number.

Your handset need not be in idle status.

Open the directory.

Select an entry (page 29).

Summary of Contents for Gigaset C450 IP











































































































Search results

Summary of Contents for Gigaset C450 IP

Reviews:

Related manuals for Gigaset C450 IP

Brands by name

Popular brands

Siemens Gigaset C450 IP, Owner'S Manual

Search results

Summary of Contents for Gigaset C450 IP

Reviews:

Related manuals for Gigaset C450 IP

Brands by name

Popular brands