Siemens Gigaset C385 User Manual Download Page 32

Page: 32 / 65

SMS (text messages)

C380-C385 / GBR / A31008-M2026-L101-1-7619 / sms_BRD_neutral.fm / 17.10.2008

ion 4,

.10.

2007

SMS (text messages)

Your phone is supplied ready for sending

SMS messages immediately.

Preconditions:

Calling Line Identification is enabled for

your phone line.

Your network provider supports SMS in

the fixed line network (information on

this can be obtained from your network

provider).

You are registered with your service

provider to send and receive SMS mes-

sages.

SMS messages are exchanged between

SMS centres operated by service provid-

ers. You must enter the SMS centre

through which you wish to send and

receive SMS messages into your phone.

You can receive SMS messages from

every

SMS centre that is entered, provided you

have registered with your service provider.
Your SMS messages are sent through the

SMS centre that is entered as the active

send service centre (

page 33). Only

one SMS centre can be the active send

service centre at any one time.
If no SMS service centre is entered,

the SMS menu only contains the entry

Settings

. Enter an SMS Service Centre

(

page 33).

Information on writing an SMS can be

found in the appendix (

page 54). An

SMS may contain up to 160 characters.

Please note:

If your phone is connected to a PABX,

please read page 33.

To receive SMS messages you must be

registered with your service provider.

Writing/sending an SMS

§Menu§

SMS

Write Message

Write an SMS. For how to enter

text,

page 54.

§Menu§

Send Text

Select and press

§OK§

Enter the number with area

code (including your local area

code) from the directory or key

it in manually, and press

§OK§

The SMS is sent.

Draft message list

You can save an SMS in the draft message

list, and edit and send it later.

Saving an SMS in the draft message list

Write an SMS (

page 31).

§Menu§

Save Text

Opening the draft message list

§Menu§

SMS

Outgoing

The first entry in the list is displayed, e.g.:

1 Current number

2 Total number of SMS

Please note

If you are interrupted by an external

call while writing an SMS, the text is

automatically saved in the draft

message list.

If the memory is full, or if the SMS

function on the base station is

being used by another handset, the

operation is cancelled. An appropri-

ate message appears in the display.

Delete SMS messages you no longer

require or send the SMS later.

Saved

01/02

01.10.08

09:23

Menu

Summary of Contents for Gigaset C385


































































Search results

Summary of Contents for Gigaset C385

Reviews:

Related manuals for Gigaset C385

Brands by name

Popular brands

Siemens Gigaset C385, User Manual

Search results

Summary of Contents for Gigaset C385

Reviews:

Related manuals for Gigaset C385

Brands by name

Popular brands