background image

17

Using the phone

C380-C385 / GBR / A31008-M2026-L101-1-7619 / starting.fm / 17.10.2008

Ve

rs

ion 4,

 29

.10.

2007

Using the phone

Control key

In the following description the side of the control key you need 

to press for each operation is indicated accordingly, e.g. 

t

 for 

"press the top of the control key". 
The control key has a number of different functions:

When the handset is in idle status

s

 

Open the directory.

t

Call up the menu for setting the handset's call volume 

(

¢

page 44), ringer tones (

¢

page 44) and advisory tones 

(

¢

page 45).

In the main menu, in submenus and lists

t

s

 

Scroll up/down line by line.

In input fields

Use the control key to move the cursor to the left 

t

 or right 

s

During an external call

s

 

Open the directory.

t

Adjust the loudspeaker volume for earpiece and handsfree mode. 

Display keys

The function of the display keys changes depending on the particular operat-

ing situation. Example:

Important display keys:

Open a context-dependent menu.
Confirm selection.

W

Delete key: deletes one character at a time from right to left.
Go back one menu level or cancel operation.
Open the last number redial list.

Ç

U

OK

Current display key functions are shown in 

the bottom display line.
Display keys

Menu

OK

Ç

Þ

Summary of Contents for Gigaset C385


































































Reviews: