background image

44

Handset settings

C380-C385 / GBR / A31008-M2026-L101-1-7619 / registr_sett.fm / 17.10.2008

Ve

rs

ion 4,

 29

.10.

2007

Setting the display

You have a choice of four colour schemes 

and several different contrasts. You can 

also set a screensaver and backlight.

§Menu§

 

¢

Settings 

¢

Handset 

¢

Display

You have the following options:

Screensaver 

The available

 

settings are 

No Screen-

saver

Globe

 or 

Digital Clock

.

Col. Scheme 

Four colour schemes are available. 

When the backlight is turned off, the 

display is shown in black and white 

regardless of the selected setting.

Contrast

There are nine available contrast levels.

Backlight

In Charger

Out of Charger

. Determines 

whether the backlight stays on perma-

nently or is turned off after a certain 

time (

= permanently switched on).

Activating/deactivating auto 
answer

When this function is activated, when a 

call arrives you can simply lift the handset 

out of the base station without having to 

press the talk key 

c

.

§Menu§

 

¢

Settings 

¢

Handset

 

¢

Auto Answer 

(

= on)

a

 Press 

and 

hold

 (idle status). 

Changing the handsfree/
earpiece volume

You can adjust the volume for handsfree 

talking to one of five settings (1-5, e.g. 

volume 3 = 

Š

) and the earpiece volume 

to one of three (1-3, e.g. volume 2 = 

).

Setting the volume during a call

The setting applies to the current mode 

(earpiece or hands-free).
You are conducting an external call. 

t

 

Press the control key.

q

 

Set the volume.

The setting will automatically be saved 

after approx. 3 seconds, if not then press 

the display key 

§OK§

.

Adjusting the volume via the menu

§Menu§

 

¢

Settings 

¢

Audio Settings

 

¢

Call Volume 

¢

Earpiece Volume 

/

 

Handsfree Volume

q

 

Adjust the volume and press 

§OK§

a

Press and 

hold

 (idle status). 

Changing ringer tones

u

Volume:
Five volume levels (1–5; e.g. volume 3 

ˆ

) and "crescendo" ring 

(6; volume increases with each ringer 

tone = 

). 

u

Melody:
List of pre-loaded ringer melodies. The 

first three melodies are the "classical" 

ringer tones.

You can also set different ringer melodies 

for the following functions:

u

External Calls

: for external calls

u

Internal Calls

: for internal calls

u

Alarm Clock

: for the alarm clock

For how to set the ringer tones for the 

base station, 

¢

page 46.

Please note

If the backlight is turned on outside the 

charging cradle, the standby time for 

the handset is considerably reduced!

Summary of Contents for Gigaset C385


































































Reviews: