background image

36

Operating the answer machine of the Gigaset C385 base station

C380-C385 / GBR / A31008-M2026-L101-1-7619 / answering_m.fm / 17.10.2008

Ve

rs

ion 4,

 29

.10.

2007

Deleting announcements

§

Menu

§

 

¢

 Voice Mail 

¢

Announcements 

¢

Delete Announcement

§OK§

Press the display key to 

confirm the prompt. 

a

 Press 

and 

hold

 (idle status). 

The pre-recorded announcement is used 

again after a personal announcement is 

deleted. 

Playing back messages

The date and time of each message is 

logged (provided this has been set, 

¢

page 13). If Calling Line Identification 

is activated, the caller's number  is dis-

played. If the caller's number is saved in 

the directory, their name is displayed. 
New messages that have not yet been 

played back are indicated by a message in 

the display and by the 

f

 key flashing on 

the handset. The 

ó

 key flashes on the 

base station.

To listen to messages:

f

Press the message key. 

Answ. Mach. 

Select as required and press 

§OK§

.

If you have new messages, playback will 

start with the first new message, other-

wise with the first old message. 
See also answer machine list 

¢

page 28.

Stopping and controlling playback 

During message playback: 

2

 

Pause playback. Press 

2

 

again to resume.

or

§Menu§

Stop playback. Press 

§OK§

 to 

resume.

t

 or

 

Return to the start of the cur-

rent message.

Press twice to go back to the 

previous message.

s

 or 

3

Skip to the next message.

Press twice to skip to the next 

but one message.

If playback is interrupted for over a 

minute, the answer machine returns to 

idle status.

Copying the phone number of a message 

to the directory

During playback or pause:

§Menu§

 

¢

Copy to Directory 

¤

Complete the entry 

¢

page 25. 

Deleting messages

You can either delete all old messages 

together or individually.

Deleting all old messages

During playback or pause:

§Menu§

 

¢

Delete all

§OK§

Press the display key to con-

firm the prompt.

Deleting individual old messages

While playback is paused:

§<C§

Press the display key.

Picking up a call from the answer 

machine

You can take a call while the answer 

machine is recording it:

c

d

Press the talk or handsfree key.

Recording stops and you can speak to the 

caller.
If 3 seconds of the call have already been 

recorded when you pick it up, the call will 

be displayed as a new message. The 

f

 

key on the handset flashes.
You can answer the call even if it is not sig-

nalled on the handset. 

Summary of Contents for Gigaset C385


































































Reviews: