3
User manual Athens/China C360,C365 English
Step 2: Setting up the handset
Fitting the battery pack
◆
Insert the plug into the socket as shown in the
enlarged view.
◆
Insert the battery pack.
◆
Place the cords in the cord routing.
Closing the battery cover
Insert the cover into the top end of the battery
compartment and press down until it clicks into
place.
Opening the battery cover
Place your fingernail between the cover and the
housing and pull the cover upwards.
Step 3: Registering the handset to
the base station and charging the
battery pack
Precondition:
The handset is not already regis-
tered to a base station.
Registering the handset to the Gigaset C360/C365
base station occurs
automatically
. Place the hand-
set in the charging cradle of the base station with
its
display facing forward
. You will hear a confir-
mation tone. Leave the handset in the base station
until it is registered.
Automatic registration can take up to 5 minutes.
While this is happening,
Registering
flashes in the
screen. The handset is assigned the lowest unas-
signed internal number (1–4). If several handsets
are registered to the base station, the internal
number is shown in the top left of the display after
registration, e.g.
2
. If the internal numbers 1 to 4
have already been assigned (four handsets have
already been registered), handset number four is
de-registered and overwritten.
Charging the battery pack
To charge the battery pack, leave the handset
in the base station for approx. 13 hours for the
Gigaset C360 or approx. 6 hours for the Gigaset
A165/A265. The battery pack is now fully charged.
The charge status of the battery pack is correctly
displayed only after uninterrupted charging/dis-
charging. Therefore you should not interrupt the
charging procedure.
Charging is electronically controlled to prevent the
battery pack from overcharging. The battery pack
heats up during charging. This is normal and not
dangerous. After a time its charge capacity will
decrease for technical reasons.
You must set the date and time to ensure that the
times of calls are logged correctly (see Menu tree,
page 10).
Once the phone is registered and the time set, the
idle display looks as shown on page 1.
Note:
The display is protected by a plastic film.
Please remove the protective film!
◆
Place the battery leads in the cable guides so
that the battery cover cannot catch on the leads
and damage them when it is closed.
◆
Use only the rechargeable
battery pack
rec-
ommended by Gigaset Communications GmbH *
(page 9), i.e. never use a conventional (non-
rechargeable) battery pack as this may cause sig-
nificant damage to health and property. For
example, the outer casing of the battery pack
could be destroyed or the battery pack could
explode. The phone could also malfunction or be
damaged as a result of using batteries that are not
of the recommended type.
◆
Only use the battery charger supplied.
◆
Only place the handset in the charging cradle
that is intended for it.
* Gigaset Communications GmbH is a licensee of the
Siemens trademark.
