24
SMS (Text Messages)
Gigaset C350 / GBR / A31008-M1621-L161-1-7619 / sms_BRD_neutral.fm / 19.1.05
SMS and PABX's
u
You can only receive a text message
when the
Caller ID (CLIP)
is forwarded
to the extension of the PABX.
The
CLIP of the number of the SMS centre is
evaluated in your
Gigaset
.
u
Depending on your PABX, you may
have to put the access code (outside
line code) before the number of the
SMS centre.
If in doubt, test your PABX by sending
two text messages to your own
number, one with the access code and
one without it.
u
When you send messages, your sender
number may be sent without your
extension number. The recipient can-
not reply to you directly in this case.
Text messages can only be sent and
received
through ISDN exchanges
with
the MSN number assigned to your base.
Activating/deactivating the
SMS function
When you deactivate the SMS function
you will not be able to receive SMS mes-
sages as text messages and your phone
will no longer send SMS messages.
Settings which you have made for sending
and receiving text messages (the numbers
of SMS centres) and any entries in the
incoming message list and the draft mes-
sage list will be retained even after the
function is deactivated.
§Menu§
5 4 O 2 L
S
§OK§
Deactivate SMS function.
Or:
1
§OK§
Activate SMS function (factory
setting).
SMS Troubleshooting
Error codes when sending
If a text message cannot be sent for a long
period of time, it is moved to the incoming
messages list with the Status Error XX.
Self help with errors
The following table lists error situations
and possible causes, and provides hints for
troubleshooting.
E0 Permanent restriction of Caller ID is acti-
vated (CLIR) or Caller ID has not been ena-
bled.
FE Error occurred during message transfer.
FD Error while connecting to the SMS centre,
see Self Help.
You cannot send messages.
1. The Caller ID service (CLIP) has not been
requested.
¥
Ask your service provider to activate this
service for you.
2. Message transmission was interrupted (e.g.
by an incoming phone call).
¥
Re-send the message.
3. Service not supported by network provider.
4. No number or an invalid number is entered
for the SMS centre activated as the send
centre.
¥
Enter phone number (page 23).
You receive a message whose text is incom-
plete.
1. Your phone's memory is full.
¥
Delete old messages (page 22).
2. The service provider has not yet sent the
rest of the message.
You have stopped receiving messages.
Call redirect (diversion) is activated with
All
Calls
, or call redirect is activated with
All
Calls
for the network mailbox.
¥
Change the call redirect setting.
