Siemens Gigaset C340 User Manual Download

Page: 19 / 48

SMS (Text Messages)

Gigaset C340 / Im-eng / A31008-M1621-R101-1-7619 / sms_BRD_neutral.fm / 23.11.04

Inserting images or sounds in a

text message

The options are:

15 images (icons)

10 sounds

You are writing a text message (page 17).

The cursor is at the correct position.

§Menu§

Language Predefined Picture

Predefined Melody

Select the object you wish to

insert and press

§OK§

The selected object is inserted.

Draft message list

You can store a message in the draft mes-

sage list, edit it later and send it.

Storing messages in the draft message list

You are writing a text message (page 17).

§Menu§

Save Text

Open the draft message list

§Menu§

SMS

Outgoing

The first entry in the list is shown, e.g.:

01/02: No. 1 of a total of 2 messages

Reading or deleting messages

Open the draft message list.

Select a message.

§Menu§

Read SMS

Select

Read SMS

and press

§OK§

to read the message. Scroll

through the message with

Or:

§Menu§

Delete Entry

Select

Delete Entry

and press

§OK§

to delete the message.

Writing/editing messages

You read a message in the draft messages

list.

§Menu§

Press the control key.

You can choose one of the following:

Write Message

Write a new message and then send or

(page 17) store it.

Use text

Edit the text of the stored message,

then send it (page 17).

Character Set

The text is displayed in the selected

character set.

Deleting the draft messages list

Open the draft message list.

§Menu§

Delete List

Select

Delete List

and press

§OK§

Press the control key to con-

firm the delete. The list is

deleted.

Long

press (idle status).

Sending an SMS to an email address

If your service provider supports the 'SMS

to email' service, then you can also send

your text messages to email addresses.
The email address must be at the start of

the text. You must send the message to

the email service of your SMS send centre.

§Menu§

SMS

Write Message

Enter the email address. End it

with a space or colon (depend-

ing on the service provider).

Enter the message.

§Menu§

Send Text

Select

Send Text

and press

§OK§

§Menu§

Message Type: E-Mail

Select

Message Type: E-Mail

and

press

§OK§

If necessary, enter the number

of the email service and

press

§OK§

The message is sent.

Saved

01/02

Maria
27.08.04

15:27

§Back§

§Menu

Summary of Contents for Gigaset C340

















































Search results

Summary of Contents for Gigaset C340

Reviews:

Related manuals for Gigaset C340

Brands by name

Popular brands

Siemens Gigaset C340, User Manual

Search results

Summary of Contents for Gigaset C340

Reviews:

Related manuals for Gigaset C340

Brands by name

Popular brands