5
De-registering handsets
You can de-register another handset from any reg-
istered Gigaset
handset as follows:
INT
¢
Select handset
¢
MENU
¢
DEREGISTER
¢
OK
¢
Enter the system PIN (default is 0000)
¢
OK
¢
DE-REGISTER?
¢
OK
¢
a
.
The internal number disappears from the de-regis-
tered handset. Handsets that have not been de-
registered retain their internal number.
Using several handsets
Internal calls
Internal calls are no-cost calls to other handsets
that are registered to the same base.
Internal conference/Call connecting
You are in conversation with an
external
caller.
To confer:
INT
(the external party hears the wait melody)
¢
Select a handset
¢
c
(confer with internal
party).
End:
MENU
¢
EXIT
¢
OK.
You are reconnected with the external caller.
Or to connect the call:
INT
¢
Select a handset
¢
c
(announce the
call if required)
¢
a
Press the end call key.
You can also press the end call key
a
immedi-
ately (without announcing the call). If the internal
party does not answer or is busy the call will come
back to you automatically.
Barging in on an external call
You are conducting an external call. An internal
party can 'barge in' on your call and join in the con-
versation (all parties hear a beep).
Requirement:
The
BARGE IN
function is activated.
Activating/deactivating internal barge-in
MENU
¢
BASE SET
¢
ADD FEATURES
¢
BARGE IN
(
‰
= on).
Internal barge-in
The display shows
LINE IN USE
. You wish to barge
in on the call.
c
Press the talk key.
You are connected. All parties hear a signal tone.
The display shows
"LISTENING IN"
.
End:
a
Press the end call key.
If one of the internal parties presses the end call
key
a
, a signal tone sounds. This does not affect
the connection between the other handset and the
external caller.
Looking for a handset ("paging")
If you have mislaid your handset you can page it
with the help of the base. To do this,
briefly
(
3
sec-
onds max.) press the register/paging key on the
front of the base (page 1). All handsets will ring at
the same time.
End paging:
Briefly
press the registration/paging
key (on the base) or the talk key
c
on any hand-
set.
INT
Press the display key.
Your own handset is marked "<".
either ...
Call a single handset:
~
Enter number of handset,
e.g.
2
.
or ...
Calling all handsets:
P
Press the star key.
... then
Ending the call:
a
Press the end call key.
i
Pressing the registration/paging key for
more than 2 seconds
puts the base into
registration mode. The handsets will not
ring in this case.
"
T
RANSFER
" will display on the screen, and you
can pick up the phone again
by press
c
Gigaset
/ English / A31008-A200-xxxx-x-xx19 /
Ke
C28
C28
ntucky
ing
.
