Siemens Gigaset C1 User Manual Download Page 98

Page: 98 / 300

Date and Time

S1_SL1 / englisch / A31008-M373-B103-1-7619 / time_calendar.fm / 08.06.2004

Cancelling an appointment

Switching off or answering an appointment alarm

An appointment is signalled with the selected ringer melody (page 106). In the display

you will see for example

Appoint. 2

. Press the display key

Silence

SMS

, to switch off the

appointment alarm. The appointment call will ring for 30 seconds if it is not answered

sooner.

Displaying missed appointments, and anniversaries

If you do not accept an appointment or anniversary alarm when it rings (page 42), it will

be saved in a list.

Open the menu.

s ç

Select the menu item and confirm.

Set Appoints.

Confirm.

Appoint. 2

Select the appointment (1-5) and confirm.

Select setting

Off

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

Save

Now press the display key to confirm the setting.

When an appointment is displayed, you can open the SMS menu with the

SMS

display key and write and send an SMS.

Open the menu.

s ç

Select the menu item and confirm.

Missed Dates

Select the menu item and confirm. The list of

appointments/anniversaries will open.

Select appointment/anniversary.
This will display information about the appointment/

anniversary. A missed appointment is marked with

, a missed anniversary with

‚

either ...

Closing the list:

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

Go Back

Press the display key.

or ...

Deleting an appointment/anniversary:

either ...

Closing the list:

Press briefly.

or ...

Deleting an appointment/anniversary:

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

Delete

Press the display key.

... then

Long

press (back to idle status).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands