Siemens Gigaset C1 User Manual Download Page 69

Page: 69 / 300

SMS (text messages)

S1_SL1 / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004

Opening an attachment to an SMS

You can open an included attachment such as a logo. You can recognise an attachment

because it is placed between "less than" and "greater than" symbols (e.g., <Logo>). For

installation see page 69.

Precondition:

You have opened a text message with attachment to read (page 65).

Using new ringer tones and logos for the handset

You can install other melodies to use in addition to the one provided with the handset

and a logo (graphic) as well. For a selection of melodies and logos, browse these web

pages on the Internet: www.siemens-mobile.com/ringtones (melodies) and

www.siemens-mobile.com/logos (logos). The Internet pages will tell you which data is

available in your country.
You can use the following formats:

◆

"iMelody" for melodies

◆

Large Picture (32*32) and Small Picture (16*16) for logos

After you have ordered melodies and/or logos to be installed, you will receive one or

SMS

(in the incoming message list, page 63) with the data.

You can install a

max. of five new melodies

. Each

new melody

replaces one of the ten

melodies available in the handset, at most, the melodies 6–10.
The

logo

replaces the display in idle status(page 13), which could cover the date, time

and the name. You can install

only one

logo.

The logo will disappear briefly under the following conditions:

◆

Pressing any key,

◆

a battery warning tone, an appointment, reminder, or wake-up call is signalled,

◆

or you take the handset out of the base/charger or you return it there.

You can create a special directory for SMS within your directory by putting

an star (*) before the names.

Move the cursor to the line containing the attach-

ment.
Press display key to open menu.

View Content

Select the menu item and confirm.

Long

press (back to idle status).

An SMS can contain multiple attachments.

There are charges for installing data. Ask your service provider.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands