Siemens Gigaset C1 User Manual Download Page 14

Page: 14 / 300

Preparing to use the handset

S1_SL1 / englisch / A31008-M373-B103-1-7619 / starting.fm / 08.06.2004

Overwriting characters to the right of the cursor

When entering

Cost per Unit:

the number of digits is fixed and there is a default entry

in the field. Use the control key to move the cursor to the

left

of the wrong digit and

then overwrite it.

Idle status

Display in idle status (example, Logo deactivated)

Reverting to idle status from anywhere in the menu:

◆

Hold down call end key

for approx. 1 sec. or

◆

Press no key: The display

automatically

reverts to the idle status after 1 or 2 min-

utes.

Changes which you have not confirmed or saved by pressing

Yes

Save

Send

or with

Store

will be lost.

Menu operation, with "Setting Handsfree Volume" as an example

Internal 11

20.09.03

09:45

•

SMS

Internal 11

20.09.03

09:45

•

SMS

Gigaset with answering

machine

Answering machine activated

Two lines with context dependent sys-

tem information

Press right side of the control key. The menu opens.

Keep pressing the control key until you see

marked in the display

(by the frame).

Press the display key.

Confirm the first display entry,

Handset Volume

using the right

side of the control key or with the display key

to confirm.

Press the left or right side of the control key to select the volume

(1–5).

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

Save

Now press the display key to confirm the setting.

Press and

hold

the "end call" key to return to the idle status.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands