Siemens Gigaset C1 User Manual Download Page 270

Page: 270 / 300

Individual handset settings

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / settings_hs.fm / 08.06.2004

Adjusting the ringer volume

Activating/deactivating the ringer

All

handsets ring when there is an incoming call. You can cancel the ringer on your

handset before you answer a call or when the handset is in idle status; the ringer can be

cancelled permanently or just for the current call.

To cancel the ringer in

idle status

, press the

key and hold until the

icon appears.

The ringer cannot be re-activated while an external call is in progress.

Appointment

Select the menu item and confirm.

or ...

For a wake-up call (on the C2; page 75):

Alarm Clock

Select the menu item and confirm.

or ...

To set all functions to ring the same (on the C2):

All Ringer Tones

Select the menu item and confirm.

Use same melody for all?

Confirm.

... then

Melody 1

Confirm melody, e. g.

Melody 1

(

‰

= activated).

Long

press (back to idle status).

MENU

Press display key to open menu.

Audio Settings

Select the menu item and confirm.

Ringer Volume

Select the menu item and confirm.

You hear the current volume. Select volume and

confirm.

Long

press (back to idle status).

Cancelling the ringer permanently:

Press the star key and hold until the ringer cannot be

heard any longer. The ringer is now

permanently

cancelled. The

icon appears in the display.

Re-activating the ringer:

Press the star key and

hold

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands