Siemens Gigaset C1 User Manual Download Page 254

Page: 254 / 300

Date and Time

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / time_calendar.fm / 08.06.2004

Setting the alarm clock

You can use your handset as an alarm clock.

Precondition:

You have set the date and time (page 74).

Activating/deactivating the alarm clock and setting the wake-up time

Cancelling a wake-up call

A wake-up call sounds on the handset with its selected ringer melody, and

Alarm Clock

appears in the display. Press

any key

to cancel the wake-up call. The alarm clock is still

switched on.

on handset:

Switching the alarm clock on:

Press the display key.

Alarm Clock

Confirm (

‰

= On).

Set the wake-up time:

Enter hours/minutes and confirm.

Example:

For 7.15, enter

QM15

. The

top line

of the

screen displays the alarm clock icon

When the 12-hour display is selected:

Select a.m. or p.m. and confirm (

‰

= On), e.g.

or ...

Deactivate the alarm clock:

Press the display key.

Alarm Clock

Confirm (

‰

disappears).

Long

press (back to idle status).

◆

A wake-up call only sounds when the handset is in the idle status and

the room monitor function is not activated.

◆

To find out how to set the wake-up volume and melody, turn to

(page 90).

◆

When you deactivate the alarm clock the

icon will only go out if

there is no active appointment.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands