Siemens Gigaset C1 User Manual Download Page 266

Page: 266 / 300

System settings

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004

Activating/deactivating Call Waiting – (CW)

This function can be set up separately for each user. When call waiting is activated the

caller will hear the ringing tone if you are already making a call. This call is announced

both acoustically, and visually on your handset screen.

When call waiting is deactivated, the caller will hear the ringing tone if you are already

making a call

and

other phones are assigned to this MSN.

When call waiting is deactivated, the caller will hear the busy tone if you are already

making a call

and

yours is the only phone assigned to this MSN.

This function is activated when the phone is supplied. For call waiting with an external

call see page 25.

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 78).

Setup user

Select the menu item and confirm.

Setup device

Select the menu item and confirm.

Int.11

Select internal number, e. g.

Int.11

MENU

Open the submenu.

Call waiting

Select the menu item and confirm (

‰

= activated).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands