Siemens Gigaset C1 User Manual Download Page 252

Page: 252 / 300

Using several handsets

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / several_handsets.fm / 08.06.2004

Activating/deactivating the Walk and Talk mode

If you press the talk key

or the handsfree key

when you are in Walk and Talk

mode, the call will go to all handsets that are in Walk and Talk mode. The connection is

made with the first handset to answer the Walk and Talk call.

Activate the Walk and Talk mode:

MENU

Press display key to open menu.

Additional Features

Select the menu item and confirm.

Walk and Talk

Select the menu item and confirm.

Deactivate the Walk and Talk mode:

MENU

Press display key to open menu.

Walk and Talk Off

Confirm.

◆

Ring and advisory tones are set in exactly the same way as if your

handsets at home were in range of the base (page 90).

◆

"Activate/deactivate ringer" (page 91) and "Activate/deactivate key-

pad lock" (page 10) are available in the Walk and Talk mode.

◆

The Walk and Talk mode is retained even when you switch your hand-

set off and back on.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands