Siemens Gigaset C1 User Manual Download Page 247

Page: 247 / 300

Setting the answering machine

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / answeringm_config.fm / 08.06.2004

Activating/deactivating automatic notification via text message

If you have received new messages on the answering machine, your telephone can

automatically send a text message to you on an external phone number (e. g. to a

mobile phone). A text message of this kind will read, for example:

New message: 01712205625 for office at 18:27 hrs on TH, 19.07. You have 1 new
AM message(s).

Automatic text message notification is not available in all countries.

Entering destination phone number for a text message

No destination number has been stored.

Precondition:

You have selected an answering machine (page 53).

Changing or deleting the destination number for a text message

Precondition:

You have selected an answering machine (page 53).

An SMS send centre must be activated to send the text message

(page 39).

Settings

Select the menu item and confirm.

SMS notificat.

Select the menu item and confirm.

Enter destination number (up to 20 digits).

MENU

Press the display key to open the submenu.

Save entry

Confirm.

Hold down (return to idle status).

Settings

Select the menu item and confirm.

SMS notificat.

Select the menu item and confirm.

MENU

Press the display key to open the submenu.

either ...

Enter or change the destination number:

Change number

Confirm.

Change the destination number.

MENU

Press the display key to open the submenu.

Save entry

Confirm.

or ...

Delete the destination number:

Delete number

Select the menu item and confirm.

Hold down (return to idle status).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands