Siemens Gigaset C1 User Manual Download Page 218

Page: 218 / 300

SMS (text messages)

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004

Activating/deactivating SMS send centre

To send an SMS you must activate the phone number for the required SMS centre as the

send centre. By doing this you determine via which SMS centre the text message is to

be sent. Text messages can be received via all SMS centres entered, as long as you have

previously completed the corresponding registration procedure (see the next chapter)

to be recognized as an SMS-capable connection.

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Service centres

Select the menu item and confirm. You will now see

the phone number list.

Select the required telephone number.

MENU

Open the submenu.

either ...

Activate SMS centre as the send centre:

Serv.centre on?

Select the menu item and confirm. The display

changes to

Serv.centre off?

The SMS centre is acti-

vated as the send centre. In the list the phone

number of the SMS centre is marked with a

‰

. The

previous send centre is automatically deactivated.

or ...

Deactivate SMS centre:

Serv.centre off?

Select the menu item and confirm. SMS centre is

deactivated.

◆

When the Service centres phone number list is opened, the display

jumps immediately to the send centre.

◆

If you have not activated an SMS send centre you will not be able to

send an SMS, but you will be able to receive text messages from all

the SMS centres you have entered.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands