Siemens Gigaset C1 User Manual Download Page 233

Page: 233 / 300

Operating the answering machine directly

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / answeringm_use.fm / 08.06.2004

Selecting announce only and AM mode

You can activate

Announcement 1

Announcement 2

Announcem. only

for each

answering machine. As supplied, the three announcements already include standard

messages. You can delete the standard messages and record your own announcements

(page 54).
When you select an announcement you also determine in which AM mode the answer-

ing machine is to run (page 52).

◆

Announcement 1

Announcement 2:

answer and record mode.

◆

Announcem. only:

announce only mode

In answer and record mode a

Concl.announcem

is given automatically at the end of a

recording providing you have recorded a concluding announcement (page 54).
When the phone is supplied

Announcement 1

is selected. The

Concl.announcem

contains nothing.

Precondition:

You have selected an answering machine (page 53).

Recording/changing announcements

You can record the following announcements:

Announcement 1 , Announcement 2,

Announcem. only

and

Concl.announcem

Precondition:

You have selected an answering machine (page 53).

Announcements

Select the menu item and confirm.

Announcement 2

Select announcement, e. g.

Announcement 2

(

‰

= set).

MENU

Press the display key to open the submenu.

Select

Confirm. The announcement set previously is deac-

tivated automatically.

The answering machine switches automatically from answer and record

mode to announce only mode when the memory is full. As soon as mem-

ory space is available again (e. g., because you have deleted some mes-

sages) the answering machine automatically switches back to recording

mode.

Announcements

Select the menu item and confirm.

Announcement 2

Select announcement, e. g.

Announcement 2

(

‰

= currently activated).

MENU

Press the display key to open the submenu.

Record

Select the menu item and confirm.

Press the display key to start recording.
Say the announcement message.

Press the display key to end the recording. The

announcement is repeated for you to check.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands