Siemens Gigaset C1 User Manual Download Page 223

Page: 223 / 300

SMS (text messages)

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004

Deleting the entire outgoing message list

This function deletes all the messages in the outgoing message list.

Precondition:

You have opened the outgoing message list (page 43).

Sending or editing text messages in the outgoing message list

Precondition:

You have opened a text message in the outgoing message list to read

(page 43).

You can now send the message as described on page 42.

MENU

Open the menu.

Delete list

Confirm.

Press the display key to confirm the prompt.

Short

press (back to idle status).

MENU

Open the menu.

either ...

Write and send a new text message:

Write Message

Confirm. The input field is opened (page 41). You

can write a new text message.

or ...

Edit and send a stored text message:

Use text

Select the menu item and confirm. The input field is

opened with the contents of the stored text mes-

sage. You can edit the text.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands