Siemens Gigaset C1 User Manual Download Page 220

Page: 220 / 300

SMS (text messages)

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004

Sending a text message and the outgoing message list

Notes on writing and sending an SMS message

If you are interrupted as you are writing (by a call, an incoming SMS or because the

handset changes to idle status because of prolonged inactivity), the SMS is automati-

cally stored in the

outgoing message list

. You can continue writing the SMS later

(page 43).
Text messages that

cannot

be sent are assigned an error status (page 50) and are placed

in the

incoming message list

Text messages are only stored automatically if sending is interrupted. If you wish to

store a message then you must do so

before it is sent

Writing text messages

Gigaset C1:

single

text message can be up to 160 characters long.

Remember

that the service provider cannot deliver a text message that contains Greek

or Cyrillic characters.

Gigaset C2:

single

text message can be up to 160 characters long. If your text is longer, it will be

sent

automatically

as a

linked

message. Up to four messages with 153 characters each

can be linked. This means you can enter up to 612 characters. Bear in mind that linked

messages incur correspondingly higher charges.

Remember

that the service provider cannot deliver a text message that contains Greek

or Cyrillic characters. If you have set Greek or Russian as your display language there-

fore, you will need to change the input language

before you write

a message.

When you have opened the input window for the text message, press the display key

MENU

first. From the menu, select

Predictive Text

Language and then press

confirm your choice. Now select an input language that uses the

Roman

character set

(e. g.

Deutsch

English

). Press

to confirm your selection and then briefly press

the "end call" key

twice to return to the input window. The setting of the input lan-

guage only applies to the current text message.

Write text messages as follows:

Remember that some

service providers

will bill you for a cancelled call

to the SMS centre. Deutsche Telekom's SMS Service will not charge for an

interrupted call.

MENU

Open the menu.

SMS

Confirm.

Write message

Confirm. The input field opens.

Input your text (for text input see page 104).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands