Siemens Gigaset C1 User Manual Download Page 204

Page: 204 / 300

Functions during a call

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / during.fm / 08.06.2004

Dealing with a waiting external call – Call Waiting (CW)

Precondition:

Call Waiting (CW) has been set up (page 87).

You hear the call waiting tone (short beep) if you receive an external call while conduct-

ing another call (internal or external). The caller's number or name will appear in the

display if Calling Line Identification is enabled.
There are three options for dealing with a waiting external call:

Accept the waiting call – enquiry call

Reject the waiting call:

Change caller:

Putting a call on hold (Call Hold)

Putting an external caller on hold:

You are conducting an external call.

Press the display key

INT

. The external caller is put on hold. You can initiate an internal

enquiry call (page 22).

Putting an internal caller on hold:

You are conducting an internal call.

MENU

Open the menu.

Accept

Confirm.

You accept the waiting call and the first call is put on

hold.

To toggle between both callers see page 23, for a

conference call see page 23.

MENU

Open the menu.

Reject

Select the menu item and confirm.

If you reject the call waiting tone on your handset, it can still be heard on

other registered handsets.

End your current call. The waiting call becomes a

normal call.

Press the talk key to accept the call.

MENU

Open the menu.

Enquiry call

Confirm.

The internal caller is put on hold.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands