Siemens Gigaset C1 User Manual Download Page 134

Page: 134 / 300

133

Operating with other devices

S1_SL1 / englisch / A31008-M373-B103-1-7619 / devices.fm / 08.06.2004

Operating with other devices

Defining device type

If your base offers the option of connecting an analogue terminal, you must set the

device type (see operating instructions for the base).

On the base:

SX205isdn

SX255isdn

SX303isdn

SX353isdn

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

Setup user

Select the menu item and confirm.

Setup device

Confirm.

Intern 21

Select internal user, e.g.

Intern 21

Press the display key to open the submenu.

Device type

Select the menu item and confirm.

Fax

Select the device type desired and confirm, e.g.

Fax

When changing a setting from one device type not requiring an incoming

MSN to a device type requiring an incoming MSN, all MSNs programmed

in the system are used as active incoming MSN for this internal user.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands