Siemens Gigaset C1 User Manual Download Page 127

Page: 127 / 300

126

System settings

S1_SL1 / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004

Activate/deactivate Call beats data

Using

Call beats data

you can set if a call is rejected or signalled during data transmis-

sion.
Your ISDN connection offers you 2 simultaneously usable telephone lines (B channels).

Both channels are used at the same time to transmit data.

◆

Call beats data

off (factory setting):

Calls during data transmission are rejected. The caller hears the busy signal.

◆

Call beats data

on:

When there are calls during data transmission, the data connection is automatically

reduced to one B channel and the call is signalled.

Changing the long distance prefix

Long distance prefixes are the first few digits required when dialling another city

(national) or to another country (international). In Germany, the factory default is:

In other countries, different long distance prefixes could be used. In this case you need

to change this setting.
Otherwise, you wouldn't be able to make some calls, such as ringbacks, from the call

list.

On the base:

SX205isdn

SX255isdn

SX303isdn

SX353isdn

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Call beats data

Select the menu item and confirm (

‰

= On).

For connections to other towns (national)

For connections abroad (international)

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 91).

ISDN settings

Select the menu item and confirm.

Lg.-dist. code

Select the menu item and confirm.

National : 0

Select type of long distance prefix,

e.g.

National : 0

Open the submenu.

Change number

Select the menu item and confirm.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands